Septic Tank Inefficiencies? It Could be Any One of these Problems

Written by Home Depot Shingles. Posted in Septic systems chicago, Septic tank treatment, Septic tank treatment chicagoland

Septic service chicago
The condition of your septic tank can be affected by many factors. It is important to keep your septic tank clean and free of any buildup. Otherwise, you could be at risk of expensive water damage and a total inefficiency of your plumbing system. These are some of the most common causes of a malfunctioning septic tank system.

You are not cleaning it enough

Septic tanks need to be cleaned regularly. A proper septic cleaning means that it is fully pumped and then completely drained out. Backup can get stuck in the underground pipes and can eventually cause problems. Pumping your septic tank every so often is not enough. You should also schedule a professional inspection and full septic cleaning out every couple of years. The exact schedule, however, will depend on the size of your household, the amount of sewage you are pumping, and how new your septic system is. If you notice consistent problems, it is possible that it needs to be pumped out more often or that you need professional septic cleaning services.

You have a blockage

Sewage blockages can cause many problems with your plumbing system. Blockages usually occur when you are not pumping your septic tank enough, you are not properly cleaning it, or you rapidly increased your pumping needs. For example, a garbage disposal alone can increase the number of solids in the septic tank by 50%. If you have just recently gotten a garbage disposal or you have just recently started using your, it could cause problems. Any time you make any significant changes to your dumping habits, it is important to also monitor the septic tank.

Your current system can no longer keep up with your septic needs

Changes to a household can also affect the efficiency of the septic tank. Usually, a septic tank should be big enough to hold two days of wastewater, which is how long it takes for solids to settle out. However, if your family size significantly increases, you could notice problems with your current system.

This is common when homeowners move into a previously owned house. The previous homeowners never had a problem with the septic systems, but then a large family moves in, and they immediately have problems with it. In general, a four person, two bedroom household needs a 1000 gallon tank at minimum. But, larger amounts of dumping or household use of water could increase that need. You will also find that older septic services do not keep up as well with larger family?s needs.

There is a plumbing problem

It is also possible that your septic problem is not even with the septic tank itself. It could also be caused by the plumbing system. For example, a block in the plumbing lines underground can prevent the waste from ever making it to the septic tank. Eventually, you will notice a backup. You might open up the septic tank to pump or to complete septic cleaning, only to find that there is no problem there. For this reason, plumbers and septic tank professionals often work hand in hand in diagnosing and correcting these problems.

Changing household sizes and uses can affect septic tanks and cause plumbing problems over time. If you are currently experiencing a plumbing or septic tank problem, it is important to evaluate where the problem is. It could be caused by user error such as a lack of cleaning or pumping enough, or it could be caused by a plumbing block somewhere else.

Leave a comment

You must be logged in to post a comment.